– The cutting pin provides automation in cutting edge gates
– The trouble-free runner is ejected from below
– The large gate enables a reduction in injection pressure and improves packing and part quality
– It can be cut to size for ease of installation
– Drawings and 3D Models can be downloaded from our website
| METRIC SIZES | ||||||||||
| CATALOGUE NUMBER | D1 | L1 | L2 | L3 | L4 | S | T | GATES | PDF DOCUMENT | 3D MODELS (IGS, STEP & X_T) |
| NH-P10.50.1 | 10mm | 50mm | 31.5mm | 21.5mm | 14mm | 3mm | M6 | 1 @ 180° | Link | Link |
| NH-P12.60.1 | 12mm | 60mm | 34mm | 24mm | 14mm | 3mm | M6 | 1 @ 180° | Link | Link |
| NH-P12.60.2-90 | 12mm | 60mm | 34mm | 24mm | 14mm | 3mm | M6 | 2 @ 90° | Link | Link |
| INCH SIZES | ||||||||||
| CATALOGUE NUMBER | D1 | L1 | L2 | L3 | L4 | S | T | GATES | PDF DOCUMENT | 3D MODELS (IGS, STEP & X_T) |
| NH-P1-2.60.1 | 1/2″ | 60mm | 34mm | 24mm | 14mm | 3mm | 1/4-20 | 1 @ 180° | Link | Link |
| NH-P1-2.60.2-90 | 1/2″ | 60mm | 34mm | 24mm | 14mm | 3mm | 1/4-20 | 2 @ 90° | Link | Link |